ios update and mesh ap

Unanswered Question
Nov 28th, 2013
User Badges:

                   I've two wlan controller Cisco2100 (Air-WLC2125-k9) with a software version 7.0.98.0. Now I want upgrade to a new release but some my Ap are in mesh mode. How this ap will upgrade ?

Many Thanks

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4 (1 ratings)
Loading.
Sandeep Choudhary Fri, 11/29/2013 - 02:11
User Badges:
  • Purple, 4500 points or more
  • Cisco Designated VIP,

    2017 Wireless

HI Simone,


Normal APs upgrade like this:


Upgrade the WLC only. The WLC will distribute the new AP firmware's at a time the AP re registers back on the controller.



Regards

Scott Fella Fri, 11/29/2013 - 04:39
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 Wireless

I would use the pre-image download as long as your mesh AP's are supported. This way you don't have a chance of any MAPs getting isolated.

http://www.cisco.com/en/US/docs/wireless/controller/7.0/configuration/gu...

Sent from Cisco Technical Support iPhone App

Actions

This Discussion