×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.
Sandeep Choudhary Mon, 12/02/2013 - 22:38
User Badges:
  • Purple, 4500 points or more
  • Cisco Designated VIP,

    2017 Wireless

HI Wilson,


we us ethis command to see the traffic going through the router:

we see that netflow sees the traffic flow sourcing from the inside interface (Se0/0/0.3,Se0/0/0.2,Se0/0/0.1) from IP address 10.10.228.21, 172.17.228.21, 172.16.228.21 going to IP address 224.0.0.5 out the outside interface (NULL). 



1st red : show the Packet size.

2nd Red shows the # Active Flows

3rd Red shows Rates and Duration.


and last three serial interface....are showing the flow details.



Hope it helps.


Regards

Dont forget to rate helpful posts.

Actions

This Discussion