×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

ASA 5505 help! wont boot

Unanswered Question
Dec 3rd, 2013
User Badges:

Any help will be great this is all I get from the console. Any suggestions will be great. Everything was woking perfectly!






CISCO SYSTEMS

Embedded BIOS Version 1.0(12)13 08/28/08 15:50:37.45



Low Memory: 632 KB

High Memory: 507 MB

PCI Device Table.

Bus Dev Func VendID DevID Class              Irq

00  01  00   1022   2080  Host Bridge

00  01  02   1022   2082  Chipset En/Decrypt 11

00  0C  00   1148   4320  Ethernet           11

00  0D  00   177D   0003  Network En/Decrypt 10

00  0F  00   1022   2090  ISA Bridge

00  0F  02   1022   2092  IDE Controller

00  0F  03   1022   2093  Audio              10

00  0F  04   1022   2094  Serial Bus         9

00  0F  05   1022   2095  Serial Bus         9



Evaluating BIOS Options ...

Launch BIOS Extension to setup ROMMON



Cisco Systems ROMMON Version (1.0(12)13) #0: Thu Aug 28 15:55:27 PDT 2008

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
johnlloyd_13 Wed, 12/04/2013 - 00:30
User Badges:
  • Blue, 1500 points or more

hi lee,


looks like the IOS got deleted or corrupted.


you'll need to upload the IOS via ROMMON/TFTPDNLD by pressing the escape key.


rommon #1> address 192.168.1.1

rommon #2> server 192.168.1.2    <<< YOUR PC WITH TFTP

rommon #3> file

rommon #4> tftpdnld

leetobin1982 Wed, 12/04/2013 - 02:44
User Badges:

Thanks for taking time to look at this, I dont think i can reach rommon. I get "invalid Key" pressing ESC.

It wint boot any further than shown on the console output. I dont know if it helps but im using putty.



High Memory: 507 MB

PCI Device Table.

Bus Dev Func VendID DevID Class              Irq

00  01  00   1022   2080  Host Bridge

00  01  02   1022   2082  Chipset En/Decrypt 11

00  0C  00   1148   4320  Ethernet           11

00  0D  00   177D   0003  Network En/Decrypt 10

00  0F  00   1022   2090  ISA Bridge

00  0F  02   1022   2092  IDE Controller

00  0F  03   1022   2093  Audio              10

00  0F  04   1022   2094  Serial Bus         9

00  0F  05   1022   2095  Serial Bus         9



Evaluating BIOS Options ...

Invalid Key: 001B



Invalid Key: 001B



Invalid Key: 001B



Launch BIOS Extension to setup ROMMON



Cisco Systems ROMMON Version (1.0(12)13) #0: Thu Aug 28 15:55:27 PDT 2008

narawat Wed, 12/04/2013 - 03:36
User Badges:

Hi Lee,


     what happens to the status light ?


I think you would need to replace the device, still would like to clarify the status light situation when the firewall boots.


Cheers,


Naveen

johnlloyd_13 Wed, 12/04/2013 - 04:40
User Badges:
  • Blue, 1500 points or more

Could you try using 'Break' key instead?

Sent from Cisco Technical Support iPhone App

leetobin1982 Wed, 12/04/2013 - 13:57
User Badges:

Hi, thanks for the help tried that and nothing. Same key error.

leetobin1982 Wed, 12/04/2013 - 16:39
User Badges:

Ive left it a few hours and ive got this.




Cisco Systems ROMMON Version (1.0(12)13) #0: Thu Aug 28 15:55:27 PDT 2008





CISCO SYSTEMS

Embedded BIOS Version 1.0(12)13 08/28/08 15:50:37.45



Low Memory: 632 KB

High Memory: 507 MB

PCI Device Table.

Bus Dev Func VendID DevID Class              Irq

00  01  00   1022   2080  Host Bridge

00  01  02   1022   2082  Chipset En/Decrypt 11

00  0C  00   1148   4320  Ethernet           11

00  0D  00   177D   0003  Network En/Decrypt 10

00  0F  00   1022   2090  ISA Bridge

00  0F  02   1022   2092  IDE Controller

00  0F  03   1022   2093  Audio              10

00  0F  04   1022   2094  Serial Bus         9

00  0F  05   1022   2095  Serial Bus         9



Evaluating BIOS Options ...

Launch BIOS Extension to setup ROMMON



Cisco Systems ROMMON Version (1.0(12)13) #0: Thu Aug 28 15:55:27 PDT 2008

i2c_read_word_w_wait() error, slot = 0x0, device = 0x64, address = 134 byte count = 2. Reason: I2C_HOST_BUSY_ERROR



Platform ASA5505



Use BREAK or ESC to interrupt boot.

Use SPACE to begin boot immediately.

Actions

This Discussion

Related Content