×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Can't power up the MPA

Unanswered Question
Dec 3rd, 2013
User Badges:

Hello all, install a interface card in slot 1 on 0/3/CPU0, however with below error message, try reload the subslot 0/3/1, still can't power up. Do I need reboot the 0/3/CPU0 Mod 80 in order to bring up this module,  or I missed something ?


MPA in bay 1 cannot be brought up as NP TM mode is incompatible with the card type.

Please perform aline card reload in order to bring this MPA module up[#0x1c9774a#]


NAME: "module 0/3/CPU0", DESCR: "80G Modular Linecard, Packet Transport Optimized"

PID: A9K-MOD80-TR      , VID: V02, SN: FOC1635N4RA


NAME: "module 0/3/0", DESCR: "ASR 9000 4-port 10GE Modular Port Adapter"

PID: A9K-MPA-4X10GE    , VID: V03, SN: FOC1645N267



NAME: "module mau 0/3/0/0", DESCR: "XFP"

PID: XFP-10GLR-OC192SR   , VID: V04 , SN: ONT163504R3    



NAME: "module mau 0/3/0/1", DESCR: "XFP"

PID: XFP-10GER-192IR+    , VID: V01 , SN: SPC155201SW    



NAME: "module mau 0/3/0/2", DESCR: "XFP"

PID: XFP-10GER-192IR+    , VID: V01 , SN: SPC15510F5X    



NAME: "module mau 0/3/0/3", DESCR: "XFP"

PID: XFP-10GER-192IR+    , VID: V01 , SN: SPC15510DBW    



NAME: "module 0/3/1", DESCR: "Unknown: Invalid EEPROM"

PID:                   , VID: N/A, SN:

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
smilstea Tue, 12/03/2013 - 17:48
User Badges:
  • Cisco Employee,

Hi,


What code are you running? 'show install active summary'

Are your FPDs up to date? 'admin show hw-mod fpd loc all'

Can you try reloading the LC (MOD80) with the MPAs already inserted?


Thanks,

Sam

YUEN WAI NAM Tue, 12/03/2013 - 18:13
User Badges:

Dear Sam,


Not yet reload the NOD80 as live traffic on MPA 0, just want to confirm if need to reload the MOD80 in order to bring the MPA 1 power up before schedule a maintenance window for that.


Here is the capture


#show install active summary

Wed Dec  4 10:09:04.703 HKT

  Active Packages:

    disk0:asr9k-px-4.2.0.CSCtz47970-1.0.0

    disk0:asr9k-px-4.2.0.CSCty46761-1.0.0

    disk0:asr9k-px-4.2.0.CSCty19939-1.0.0

    disk0:asr9k-px-4.2.0.CSCtx89601-1.0.0

    disk0:asr9k-px-4.2.0.CSCtx28089-1.0.0

    disk0:asr9k-px-4.2.0.CSCtl84822-1.0.0

    disk0:asr9k-optic-px-4.2.0

    disk0:asr9k-mini-px-4.2.0

    disk0:asr9k-k9sec-px-4.2.0

    disk0:asr9k-px-4.2.0.CSCtw65376-1.0.0

    disk0:asr9k-mpls-px-4.2.0

    disk0:asr9k-px-4.2.0.CSCtu17119-1.0.0

    disk0:asr9k-mgbl-px-4.2.0

    disk0:asr9k-mcast-px-4.2.0

    disk0:asr9k-px-4.2.0.CSCty91147-1.0.0

    disk0:asr9k-px-4.2.0.CSCty48838-1.0.0

    disk0:asr9k-px-4.2.0.CSCtt70239-1.0.0

    disk0:asr9k-px-4.2.0.CSCtx29916-1.0.0

    disk0:asr9k-px-4.2.0.CSCtz01257-1.0.0

    disk0:asr9k-px-4.2.0.CSCty37179-1.0.0

    disk0:asr9k-px-4.2.0.CSCtx21795-1.0.0

    disk0:asr9k-fpd-px-4.2.0

    disk0:asr9k-px-4.2.0.CSCtz35514-1.0.0



#admin show hw-module fpd location all

Wed Dec  4 10:10:00.828 HKT



===================================== ==========================================

                                      Existing Field Programmable Devices

                                      ==========================================

                                        HW                       Current SW Upg/

Location     Card Type                Version Type Subtype Inst   Version   Dng?

============ ======================== ======= ==== ======= ==== =========== ====

0/RSP0/CPU0  A9K-RSP440-TR              1.0   lc   cbc     0      16.114    No

                                              lc   fpga2   0       0.08     No

                                              lc   fpga3   0       4.09     No

                                              lc   fpga1   0       0.09     No

                                              lc   rommon  0       0.46     No

----------------------------------------------------------------------------------------------------------

0/RSP0/CPU0  ASR-9010-FAN               1.0   lc   cbc     1       4.00     No

----------------------------------------------------------------------------------------------------------

0/RSP0/CPU0  ASR-9010-FAN               1.0   lc   cbc     2       4.00     No

----------------------------------------------------------------------------------------------------------

0/RSP1/CPU0  A9K-RSP440-TR              1.0   lc   cbc     0      16.114    No

                                              lc   fpga1   0       0.09     No

                                              lc   fpga2   0       0.08     No

                                              lc   fpga3   0       4.09     No

                                              lc   rommon  0       0.46     No

----------------------------------------------------------------------------------------------------------

0/0/CPU0     A9K-MOD80-TR               1.0   lc   cbc     0      20.113    No

                                              lc   fpga2   0       0.05     No

                                              lc   fpga4   0       0.06     No

                                              lc   rommon  0       1.23     No

----------------------------------------------------------------------------------------------------------

0/0/0        A9K-MPA-20X1GE             1.0   spa  fpga3   0       0.08     No

----------------------------------------------------------------------------------------------------------

0/0/1        A9K-MPA-4X10GE             1.0   spa  fpga6   1       0.09     No

----------------------------------------------------------------------------------------------------------

0/1/CPU0     A9K-MOD80-TR               1.0   lc   cbc     0      20.113    No

                                              lc   fpga2   0       0.05     No

                                              lc   fpga4   0       0.06     No

                                              lc   rommon  0       1.23     No

----------------------------------------------------------------------------------------------------------

0/1/0        A9K-MPA-4X10GE             1.0   spa  fpga6   0       0.09     No

----------------------------------------------------------------------------------------------------------

0/1/1        A9K-MPA-4X10GE             1.0   spa  fpga6   1       0.09     No

----------------------------------------------------------------------------------------------------------

0/2/CPU0     A9K-MOD80-TR               1.0   lc   cbc     0      20.113    No

                                              lc   fpga2   0       0.05     No

                                              lc   fpga4   0       0.06     No

                                              lc   rommon  0       1.23     No

----------------------------------------------------------------------------------------------------------

0/2/0        A9K-MPA-4X10GE             1.0   spa  fpga6   0       0.09     No

----------------------------------------------------------------------------------------------------------

0/2/1        A9K-MPA-4X10GE             1.0   spa  fpga6   1       0.09     No

----------------------------------------------------------------------------------------------------------

0/3/CPU0     A9K-MOD80-TR               1.0   lc   cbc     0      20.115    No

                                              lc   fpga2   0       0.05     No

                                              lc   fpga4   0       0.06     No

                                              lc   rommon  0       1.28     No

----------------------------------------------------------------------------------------------------------

0/3/0        A9K-MPA-4X10GE             1.101 spa  fpga6   0       0.09     No

----------------------------------------------------------------------------------------------------------

smilstea Wed, 12/04/2013 - 04:44
User Badges:
  • Cisco Employee,

Hi,


Yes this was an issue which got corrected between 4.2.0 and 4.2.1 so a reload as I mentioned will need to be done. If you want to upgrade so that this and other issues are fixed I would recommend 4.3.4 when it comes out in about a week, the other good option is 4.2.3 (with SMU pack 3).


Thanks,

Sam

Actions

This Discussion