Per App VPN: Cisco Anyconnext to ASA

Unanswered Question
Dec 9th, 2013
User Badges:
  • Bronze, 100 points or more

Has anyone deployed per app VPN on IOS utilizing the anyconnect app or ASA?

I've seen some MDM platforms supporting this feature, but none using an ASA as the termination of the VPN tunnel. Any config examples out there, blogs etc?

Sent from Cisco Technical Support iPhone App

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Jon Are Endrerud Tue, 12/10/2013 - 09:33
User Badges:

What do you mean by deployed, I have used the app for connecting.

Sent from Cisco Technical Support iPhone App

salehnoordeen Fri, 09/12/2014 - 05:00
User Badges:


  Did you get a chance to make it work ?

Am looking to setup per app vpn on IOS 7 using cisco anyconnect client.

Some documentations or config examples would help 



kevinlsk1 Wed, 04/16/2014 - 08:21
User Badges:

I am facing the same problem.

I can't find any documentation saying Cisco Anyconnect officially supports Apple Per-App VPN, especially on Apple iOS devices.

My test shows that connecting to Cisco Anyconnect using normal VPN payload works. However, if I use the Per-App VPN payload as specified in Apple MDM documentation, no network traffic actually goes through the VPN tunnel.

I have tried to contact Apple DTS, they did not know the answer and told me to contact Cisco.

Does anyone have any success using Cisco Anyconnect for Per-App VPN?


This Discussion