Per App VPN: Cisco Anyconnext to ASA

Jacob Snyder · ‎12-09-2013

Has anyone deployed per app VPN on IOS utilizing the anyconnect app or ASA?

I've seen some MDM platforms supporting this feature, but none using an ASA as the termination of the VPN tunnel. Any config examples out there, blogs etc?

Sent from Cisco Technical Support iPhone App

Jon Are Endrerud · ‎12-10-2013

What do you mean by deployed, I have used the app for connecting.

Sent from Cisco Technical Support iPhone App

Please rate as helpful, if that would be the case. Thanx

salehnoordeen · ‎09-12-2014

Hi

Did you get a chance to make it work ?

Am looking to setup per app vpn on IOS 7 using cisco anyconnect client.

Some documentations or config examples would help

Thanks

kevinlsk1 · ‎04-16-2014

I am facing the same problem.

I can't find any documentation saying Cisco Anyconnect officially supports Apple Per-App VPN, especially on Apple iOS devices.

My test shows that connecting to Cisco Anyconnect using normal VPN payload works. However, if I use the Per-App VPN payload as specified in Apple MDM documentation, no network traffic actually goes through the VPN tunnel.

I have tried to contact Apple DTS, they did not know the answer and told me to contact Cisco.

Does anyone have any success using Cisco Anyconnect for Per-App VPN?