BLF Feature On CUCM 9.1

Answered Question
Dec 10th, 2013
User Badges:

Dear all,


I am running call manager ver9.1.


I need to enable BLF feature for all the users.


For example: The users can see that the other party is on call or busy on the other line.

                    I mean there is an indication on the ip phone that shows that the other user is on call.



Kindly guide me how i can accomplish this task.


I already enabled the BLF call list in the Enterprise Parameter of CUCM.


Regards


Malik                  

Correct Answer by Jonathan Schulenberg about 3 years 8 months ago

BLF Speed Dials (i.e. physical buttons on phones) can only be added by an administrator. You would need to create a Phone Button Template per-model to define the PLK role as BLF Speed Dial. Once that's done you can then assign the buttons to monitor specific DNs.


In the case of the Corporate Directory, the user's phone must have a SUBSCRIBE CSS which includes the target DNs. This is commonly the OnNet or Internal CSS. Additionally, the user and monitored DN must be in the same Presence Group; by default there is only one so you're good on that front.


http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/9_1_1/ccmfeat/CUCM_BK_C3E0EFA0_00_cucm-features-services-guide-91_chapter_010.html



Please remember to rate helpful responses and identify helpful or correct answers.

Correct Answer by Ajay Viswanath about 3 years 8 months ago

Hi,


Are you trying to add a new BLF speed dial for all the phones are are you looking at enabling the presence on the directory level..?


Regards

Ajay

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (2 ratings)
Loading.
Correct Answer
Ajay Viswanath Tue, 12/10/2013 - 04:03
User Badges:
  • Cisco Employee,

Hi,


Are you trying to add a new BLF speed dial for all the phones are are you looking at enabling the presence on the directory level..?


Regards

Ajay

Correct Answer
Jonathan Schulenberg Tue, 12/10/2013 - 04:37
User Badges:
  • Super Bronze, 10000 points or more
  • Cisco Designated VIP,

    2017 IP Telephony

BLF Speed Dials (i.e. physical buttons on phones) can only be added by an administrator. You would need to create a Phone Button Template per-model to define the PLK role as BLF Speed Dial. Once that's done you can then assign the buttons to monitor specific DNs.


In the case of the Corporate Directory, the user's phone must have a SUBSCRIBE CSS which includes the target DNs. This is commonly the OnNet or Internal CSS. Additionally, the user and monitored DN must be in the same Presence Group; by default there is only one so you're good on that front.


http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/9_1_1/ccmfeat/CUCM_BK_C3E0EFA0_00_cucm-features-services-guide-91_chapter_010.html



Please remember to rate helpful responses and identify helpful or correct answers.

Actions

This Discussion