×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

fxo port, outgoing call

Unanswered Question
Dec 10th, 2013
User Badges:

hi,


got this config,


voice translation-rule 1000

rule 1 /^9/ //


voice translation-profile STRIP_9

translate called 1000


dial-peer voice 30 pots

translation-profile outgoing STRIP_9

destination-pattern 95554443333

port 0/0/0

forward-digits all

!


voice-port 0/0/0

connection plar opx "MYHOMEPHONEDID"

description *** HOME DID ***

caller-id enable



when in dial-peer I change destination-pattern to 5554443333 I can call out. when I change it and put the 9 infront it stops working.

ideas?

thanks.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
pamirian76 Tue, 12/10/2013 - 17:47
User Badges:

oops my bad got it going.


under telephony-service

I had that number I'm trying to call to test with into after-hours block.

removed that and all is working.

Actions

This Discussion