×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

EX90 registrerd with CUCM 9.1.1 using media encrytion for calls

Unanswered Question
Dec 11th, 2013
User Badges:

Hello,

I have an environment consisting of a CUCM, a vcs control

I have registered SX20 (SIP) on the CUCM and registered SX20 (SIP) on the VCS Control

I read the Cisco TelePresence Endpoints and Cisco Unified Communications Manager guide

I seek to have if required to have dongles CTL so that my SX20 (version 6.2) that are stored on my CUCM (9.1.1)


2 when recorded on the VCS Control to call (call sip) SX20 media are encrypted

2 when recorded on the CUCM to call control (call sip) SX20 media are not encrypted

question:

I seek to have if required to have dongles CTL so that my SX20 (version 6.2) that are stored on my CUCM (9.1.1)

as if this is the case power 2 3010 CTS registered on CUCM to have encrypted the media during a call between them.

thank you in advance

laurent.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion