ASA 5505 /VPN/Radius

Answered Question
Dec 11th, 2013
User Badges:

Hello


Trying to configure VPN access via radius on ASA 5505


Trying to test authentication, but geting an errror see below


Thanks

aaa-server RADIUS protocol radius

aaa-server RADIUS (inside) host x.x.x.x

key *****

radius-common-pw *****

aaa-server TACACS+ protocol tacacs+

aaa-server radiusserver protocol radius

aaa-server radiusserver (inside) host x.x.x.x

key *****


tunnel-group remoteusers type remote-access

tunnel-group remoteusers general-attributes

address-pool vpn

default-group-policy remoteusers

tunnel-group remoteusers ipsec-attributes

pre-shared-key *****


fw# test aaa-server authentication radius host x.x.x.x username xxxx password xxxxx

ERROR: aaa-server group <radius> does not exist

Correct Answer by Nicholas Carrieri about 3 years 8 months ago

Your group name is radiusserver, not radius, you should be able to use the following:


test aaa-server authenticat radiusserver host x.x.x.x username xxxx passworkd xxxxx

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Nicholas Carrieri Wed, 12/11/2013 - 12:56
User Badges:
  • Cisco Employee,

Your group name is radiusserver, not radius, you should be able to use the following:


test aaa-server authenticat radiusserver host x.x.x.x username xxxx passworkd xxxxx

Actions

This Discussion