AAA/RADIUS server priority in WLC

Unanswered Question
Dec 16th, 2013
User Badges:

Hi,


As of now I have our RADIUS server defined in both the WLAN and Flexconnect group. Do I need to define it in both? Which one is primarily used for authentication of users?


Regards,

Philip

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Rasika Nayanajith Mon, 12/16/2013 - 01:56
User Badges:
  • Purple, 4500 points or more
  • Cisco Designated VIP,

    2017 Wireless

Hi Phillip,


When you configure AAA server under WLAN -> Security ->AAA server section that will take the precedance over any other configured AAA servr in the controller.


Typically you configure primary & secondary AAA server for FlexConnect AP group, to make it administratively easy to configurer it for multiple H-REAP/FlexConnect APs (simply you can add AP to the group which will get those radius config). You requires this if you have multiple AAA servers & in H-REAP standalone mode you require to use them.


This is some reference post with respect to WLC 7.0. code which may help you on this

http://mrncciew.com/2013/03/12/h-reap-with-radius/


HTH

Rasika

**** Pls rate all useful responses ****

Actions

This Discussion

 

 

Trending Topics - Security & Network