12-16-2013 12:57 AM - edited 07-04-2021 01:26 AM
Hi,
As of now I have our RADIUS server defined in both the WLAN and Flexconnect group. Do I need to define it in both? Which one is primarily used for authentication of users?
Regards,
Philip
12-16-2013 01:56 AM
Hi Phillip,
When you configure AAA server under WLAN -> Security ->AAA server section that will take the precedance over any other configured AAA servr in the controller.
Typically you configure primary & secondary AAA server for FlexConnect AP group, to make it administratively easy to configurer it for multiple H-REAP/FlexConnect APs (simply you can add AP to the group which will get those radius config). You requires this if you have multiple AAA servers & in H-REAP standalone mode you require to use them.
This is some reference post with respect to WLC 7.0. code which may help you on this
http://mrncciew.com/2013/03/12/h-reap-with-radius/
HTH
Rasika
**** Pls rate all useful responses ****
12-20-2013 05:29 PM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide