Solved: Prime Infrastructure 2.0 top cpu utilization

SpongeRob · ‎12-16-2013

We've recently installed PI2.0 and it is working well, with a small exception - the top cpu utilization only shows the wireless controllers. is there a setting to adjust that to all devices or has anyone worked in a fix ?

thanks for your support.

AFROJ AHMAD · ‎12-16-2013

Hi ,

check the attched screen shot and look for the same settings..

Thanks-

Afroz

[Do rate the useful post]

Thanks- Afroz [Do rate the useful post] ****Ratings Encourages Contributors ****

View solution in original post

AFROJ AHMAD · ‎12-16-2013

Hi ,

check the attched screen shot and look for the same settings..

Thanks-

Afroz

[Do rate the useful post]

Thanks- Afroz [Do rate the useful post] ****Ratings Encourages Contributors ****

SpongeRob · ‎12-18-2013

SWEET - Thank you very much :-)

SpongeRob · ‎12-19-2013

...it had potential, however the only thing to display are the wireless controllers. ALL was selected and it onlyu displays the WCs. What say you ?

Marvin Rhoads · ‎12-19-2013

My Prime 2.0 shows my switches along with the WLC when configured per Afroz's suggestion.

SpongeRob · ‎12-19-2013

Thanks - it should be that simple - it actually had until the server was reloaded, all services are up. I'll speak with TAC