×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Paper License

Answered Question
Dec 17th, 2013
User Badges:

Hi All,


We have a CUCM to which we have 2 locations already connected. All the phones are registered to this UCM. Now we have a new location addedd to the UCM. The phones are registered and is working fine (6945, 8945). But for the license we have got a paper license with a right to use. Now do we need to separately add licenses for the new phone or the paper license is enough. As of now the phones have utilized the licenses on the UCM.



Regards,

Devraj

Correct Answer by Chris Deren about 3 years 8 months ago

These are CME licenses which do not work with CUCM, you need to purchase CUCM licenses either CUWL or UCL.

Chris

Sent from Cisco Technical Support iPhone App

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Chris Deren Tue, 12/17/2013 - 06:41
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,
  • Cisco Designated VIP,

    2017 IP Telephony, Contact Center, Unified Communications

What version is your CUCM system?

Are you saying you did not receive a PAK which you can register?  Do you know what part number you purchased? Perhaps it was for CME solution?


Chris

devrajdedhia Sat, 12/21/2013 - 01:23
User Badges:

The CUCM version is 8.6.2. We got a paper license which says Right to use notification.


Should we receive a different paper/license for PAK. The part number that we purchased are

SW-CCME-UL-6945= and SW-CCME-UL-8945.

Yes it is for CME. There are already 2 remote locations connected to this CUCM. We have added one more location with 6945 (6no)
and 8945 (1 no.). So we only got paper license when we purchased phones and nothing else. 


Regards,
Devraj
Aman Soi Sat, 12/21/2013 - 01:45
User Badges:
  • Purple, 4500 points or more
  • Cisco Designated VIP,

    2017 IP Telephony

Hi Devraj,


you would get only Paper licenses for CME which are RTU.


regds,

aman

devrajdedhia Sat, 12/21/2013 - 03:46
User Badges:

So no need to upload any license file in the UCM separately? How do we know whether the phone is licensed on the UCM, and whether it not utilizing any license from the UCM.



Regards,

Devraj

Aman Soi Sat, 12/21/2013 - 04:27
User Badges:
  • Purple, 4500 points or more
  • Cisco Designated VIP,

    2017 IP Telephony

Hi Devraj,


For call manager, need to have a license for IP phones. u can check the same under System- licensing -----License unit Report.


units authorised---units used  and units remaining.



regds,

aman

Aman Soi Tue, 12/17/2013 - 06:42
User Badges:
  • Purple, 4500 points or more
  • Cisco Designated VIP,

    2017 IP Telephony

Hi Devraj,


which call manager version u are using?


u need to have licneses on call manager to get the phones regsitered.


regds,

aman

Correct Answer
Chris Deren Sat, 12/21/2013 - 07:35
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,
  • Cisco Designated VIP,

    2017 IP Telephony, Contact Center, Unified Communications

These are CME licenses which do not work with CUCM, you need to purchase CUCM licenses either CUWL or UCL.

Chris

Sent from Cisco Technical Support iPhone App

Actions

This Discussion