Solved: Paper License

devrajdedhia · ‎12-17-2013

Hi All,

We have a CUCM to which we have 2 locations already connected. All the phones are registered to this UCM. Now we have a new location addedd to the UCM. The phones are registered and is working fine (6945, 8945). But for the license we have got a paper license with a right to use. Now do we need to separately add licenses for the new phone or the paper license is enough. As of now the phones have utilized the licenses on the UCM.

Regards,

Devraj

Chris Deren · ‎12-21-2013

These are CME licenses which do not work with CUCM, you need to purchase CUCM licenses either CUWL or UCL.

Chris

Sent from Cisco Technical Support iPhone App

View solution in original post

Chris Deren · ‎12-17-2013

What version is your CUCM system?

Are you saying you did not receive a PAK which you can register? Do you know what part number you purchased? Perhaps it was for CME solution?

Chris

devrajdedhia · ‎12-21-2013

The CUCM version is 8.6.2. We got a paper license which says Right to use notification.

Should we receive a different paper/license for PAK. The part number that we purchased are

SW-CCME-UL-6945= and SW-CCME-UL-8945.

Yes it is for CME. There are already 2 remote locations connected to this CUCM. We have added one more location with 6945 (6no)

and 8945 (1 no.). So we only got paper license when we purchased phones and nothing else.

Regards,

Devraj

Aman Soi · ‎12-21-2013

Hi Devraj,

you would get only Paper licenses for CME which are RTU.

regds,

aman

devrajdedhia · ‎12-21-2013

So no need to upload any license file in the UCM separately? How do we know whether the phone is licensed on the UCM, and whether it not utilizing any license from the UCM.

Regards,

Devraj

Aman Soi · ‎12-21-2013

Hi Devraj,

For call manager, need to have a license for IP phones. u can check the same under System- licensing -----License unit Report.

units authorised---units used and units remaining.

regds,

aman

Aman Soi · ‎12-17-2013

Hi Devraj,

which call manager version u are using?

u need to have licneses on call manager to get the phones regsitered.

regds,

aman

Chris Deren · ‎12-21-2013

These are CME licenses which do not work with CUCM, you need to purchase CUCM licenses either CUWL or UCL.

Chris

Sent from Cisco Technical Support iPhone App