×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Display Skills next to Agent in Supervisor Console

Unanswered Question
Dec 17th, 2013
User Badges:

Hi All,


Is there any way to display skills next to the Agent in supervisor Console? I have a customer that Agents Skills get changed from time to time, and supervisor wants to see that.



Thanks,


HM

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Gergely Szabo Tue, 12/17/2013 - 23:33
User Badges:
  • Green, 3000 points or more
  • Community Spotlight Award,

    Member's Choice, December 2015

Hi,

is it UCCX or UCCE? CAD or CTI OS?

G.

ANGEL FERNANDEZ... Wed, 12/18/2013 - 05:06
User Badges:

Hi, I have the same cuestion, my customer has installed UCCXExpress 9.02.


Thank you.

Jonathan Schulenberg Wed, 12/18/2013 - 06:06
User Badges:
  • Super Bronze, 10000 points or more
  • Cisco Designated VIP,

    2017 IP Telephony

The closest you can get in CSD is to click on a CSQ in the left column tree-view. It will show you all of the agents currently skilled in it. You cannot see a list of the CSQs a specific agent is in though, unfortunately. This is available within /appadmin on the Resource Configuration page by clicking the Open Printable Report link in the upper-right.



Please remember to rate helpful responses and identify helpful or correct answers.

ANGEL FERNANDEZ... Wed, 12/18/2013 - 06:38
User Badges:

Hi Jonathan, my system is UCCXExpress. I´m using CAD. I have tried look for these option and I  don´t find it, Could you tell me where configure these options?

Thanks you.

Jonathan Schulenberg Wed, 12/18/2013 - 06:40
User Badges:
  • Super Bronze, 10000 points or more
  • Cisco Designated VIP,

    2017 IP Telephony

None of this information is available in CAD.


CSD is Cisco Supervisor Desktop, a separate Windows application you must have permissions and team role assignment to run. The http:///appadmin is the administrative UI. The menu for this is Subsystems > RmCm > Resources.



Please remember to rate helpful responses and identify helpful or correct answers.

Actions

This Discussion