×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

PVST and Rapid PVST

Answered Question
Dec 19th, 2013
User Badges:

Does it matter if you have lets say pvst on one or more switches on the same network and rapid pvst on other switches on the same network?

Correct Answer by John Blakley about 3 years 8 months ago

They're backwards compatible, but you'll lose the advantage of Rapid-pvst when connected to a pvst switch.



HTH,
John

*** Please rate all useful posts ***

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
John Blakley Thu, 12/19/2013 - 03:22
User Badges:
  • Purple, 4500 points or more

They're backwards compatible, but you'll lose the advantage of Rapid-pvst when connected to a pvst switch.



HTH,
John

*** Please rate all useful posts ***

Actions

This Discussion