Looking for NL Call Progress Tones for SPA504g

Answered Question
Dec 31st, 2013
User Badges:

Can someone point me to the list of Call Progress Tones for the Netherlands?

Thanks,

Ab

Correct Answer by Dan Lukes about 3 years 7 months ago

I asked Google for you (call progress tone SPA cisco netherland) and got:


http://vxlabs.com/2011/02/05/sipura-linksys-cisco-spa3102-voice-gateway-in-the-netherlands/


SPA3102 notation os the same as SPA504G.


Rate usefull answers and/or mark thread as answered ;-)

Correct Answer by Dan Lukes about 3 years 7 months ago
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (2 ratings)
Loading.
abdekwant Fri, 01/03/2014 - 03:27
User Badges:

Hi Dan, thanks for your reference! I was hoping someone had the setting for all call progress tone fields in the 504g phone in cisco notation perhaps, ready to go and set manually (gui) or upload tftp (xml). If someone does, I appriciate sharing.

abdekwant Fri, 01/03/2014 - 06:24
User Badges:

Perfect Dan.

I tried to ask Google ... but was unsuccessful.

Thanks for the help asking it the right questions :-)

Ab

abdekwant Fri, 01/03/2014 - 10:31
User Badges:

After reviewing the information in the link that Dan provided I found a few believed discrapancies. Just to share what I ended up setting on the SPA504g. Here is the list of values I changed from its default value:

  • Dial Tone: 425@-19;20(*/0/1)
  • Outside Dial Tone: 425@-19;20(*/0/1)    
  • Busy Tone: 425@-19;10(.5/.5/1)  
  • Reorder Tone: 425@-19;10(.25/.25/1)
  • Ring Back Tone: 425@-19;*(2/4/1)
  • Call Waiting Tone: 425@-10;60(.5/9.5/1) 
  • SIT1 Tone: 950@-19,1400@-19,1800@-19;30(.333/0/1,.333/0/2,.333/1/3) 
  • SIT2 Tone: 950@-19,1400@-19,1800@-19;30(.333/0/1,.333/0/2,.333/1/3)
  • SIT3 Tone: 950@-19,1400@-19,1800@-19;30(.333/0/1,.333/0/2,.333/1/3)
  • SIT4 Tone: 950@-19,1400@-19,1800@-19;30(.333/0/1,.333/0/2,.333/1/3)
  • Holding Tone: 425@-19;60(.5/9.5/1)

Ab

Actions

This Discussion