×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

configuration of vpn failover on edge router

Unanswered Question
Jan 2nd, 2014
User Badges:

how to configure vpn failover on edge router if one isp line goes down then switchover to other isp line.

on remote side there is also two isp line i also want to implement on remote side.



i want to implement on live scenario.


thank you.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Karsten Iwen Fri, 01/03/2014 - 00:06
User Badges:
  • Purple, 4500 points or more
  • Cisco Designated VIP,

    2017 Firewalling, VPN

the best solution is to have two virtual tunnel interfaces (VTIs) on each router. One works over ISP1, and the other over ISP2. With the help of an IGP you can control which link will be the primary and switch to the backup-link automatically when a failure happens. Ideally you would have two routers on each site, one for each provider.

Sent from Cisco Technical Support iPad App

Actions

This Discussion

Related Content