×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

RV110W SNMP

Unanswered Question
Jan 12th, 2014
User Badges:

Hello,


what do I wrong?


I have a RV110W (1.2.0.10) and will send SNMP to a linux-server. But the only thing I receive is after a warmstart:


2014-01-08 10:11:21 router.local [192.168.100.1] (via UDP: [192.168.100.1]:32770->[192.168.100.9]:162) TRAP, SNMP v1, community public

        SNMPv2-SMI::enterprises.3.1.1 Warm Start Trap (0) Uptime: 0:00:00.01


2014-01-08 10:11:22 router.local [192.168.100.1] (via UDP: [192.168.100.1]:32770->[192.168.100.9]:162) TRAP, SNMP v1, community public

        SNMPv2-SMI::enterprises.3.1.1 Link Up Trap (0) Uptime: 0:00:00.01

        IF-MIB::ifIndex.10 = INTEGER: 1 IF-MIB::ifAdminStatus.10 = INTEGER: up(1)       IF-MIB::ifOperStatus.10 = INTEGER: up(1)

2014-01-08 10:11:22 router.local [192.168.100.1] (via UDP: [192.168.100.1]:32770->[192.168.100.9]:162) TRAP, SNMP v1, community public

        SNMPv2-SMI::enterprises.3.1.1 Link Up Trap (0) Uptime: 0:00:00.01

        IF-MIB::ifIndex.1 = INTEGER: 1  IF-MIB::ifAdminStatus.1 = INTEGER: up(1)        IF-MIB::ifOperStatus.1 = INTEGER: up(1)


Greets

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion

Related Content