×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Cisco SX20 web interface call control - input security pin

Unanswered Question
Jan 14th, 2014
User Badges:

Hi,


I have a Cisco SX20 and I would like to use web interface to dial to a conferece room (URI). However, the conference room requires security pin before I can see other participants. Is there any way I can enter the security pin through the web interface? The security pin can be easily entered from a remote control or a control panel, but it seems like the web interface can't accomodate such pin input. 


Thank you

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Wayne DeNardi Tue, 01/14/2014 - 20:30
User Badges:
  • Green, 3000 points or more
  • Cisco Designated VIP,

    2017 TelePresence

There's no simple way to do it as you would from the remote or touch panel, but it is possible.


You can do it from the Web Interface through the Configuration > API page - You can type the appropriate xCommands in to the box at the bottom of the screen to get the unit to send the DTMF tones, ie


xCommand DTMFSend DTMFString:1234


Wayne

--

Please remember to rate responses and to mark your question as answered if appropriate.

Wayne DeNardi Mon, 02/03/2014 - 19:25
User Badges:
  • Green, 3000 points or more
  • Cisco Designated VIP,

    2017 TelePresence

You're welcome.  I hope that's going to work for you.


If your question is now answered, can you please mark it as so by clicking the correct answer button (see

https://supportforums.cisco.com/community/help#discussions_correct for how to do so).


Wayne
--
Please remember to rate responses and to mark your question as answered if appropriate.

Actions

This Discussion