×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Cisco qos on 6500

Unanswered Question
Jan 15th, 2014
User Badges:

Hello guys,

I'm working for the very first time on a 6500. This is the IOS "

Cisco IOS Software, s2t54 Software (s2t54-ADVIPSERVICESK9_NPE-M), Version 15.0(1)SY4, RELEASE SOFTWARE (fc3)"

Could you give me some infos about qos?

mls qos is not working, qos map dscp or cos too... I'm kinda lost.

Thanks

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
mtsb Wed, 01/15/2014 - 20:07
User Badges:
  • Bronze, 100 points or more

Hi Michele,


I have not worked extensively on QoS on SUP2T either but for the SUP2T supervisor type you will not see the mls commands as the architecture and forwarding of this EARL8 asic is slightly different from that of SUP720 or RSP supervisors which uses EALR7


These links will give you some information you are looking for....

http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps708/white_paper_c11-652042.html#wp9000512

http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps708/white_paper_c11-676346.html


HTH,

Madhu

Actions

This Discussion