CRS-1 boot failed problem ( REDFS-5-INIT_FAILED)

Unanswered Question
Jan 15th, 2014
User Badges:

Hi expert ,

today I face new problem with one RP , :



Initializing DDR SDRAM...found 4096 MB


Initializing ECC on bank 0


Initializing ECC on bank 1


Initializing ECC on bank 2


Initializing ECC on bank 3


Turning off data cache, using DDR for first time



Initializing NVRAM...


Testing a portion of DDR SDRAM ...done


Reading ID EEPROMs ...


Initializing SQUID ...


Initializing PCI ...



PCI0 device[1]: Vendor ID 0x10ee


PCI0 device[1]: Device ID 0x300e


PCI1 device[1]: Device ID 0x1100


PCI1 device[1]: Vendor ID 0x1013


PCI1 device[2]: Device ID 0x680


PCI1 device[2]: Vendor ID 0x1095


PCI1 device[3]: Device ID 0x5618


PCI1 device[3]: Vendor ID 0x14e4


Configuring MPPs ...


Configuring PCMCIA slots ...



System Bootstrap, Version 1.53(20090311:225342) [CRS-1 ROMMON],

Copyright (c) 1994-2009 by Cisco Systems, Inc.



Acquiring backplane mastership ........failed



Board type is 0x100002 (1048578)



Switch 0 initialized


Backplane FE port Up... Enabling


Enabling watchdog


G4(7457-NonSMP-MV64360 Rev 4) platform with 4096 MB of main memory



..


..


Acquiring backplane mastership....failed.


Unable to access backplane ... invoking READ EEPROM protocol



Enabling only inter-RP port... successful



Sending backplane ID EEPROM read request


Our MAC address is 0249.4450.0008


Interface link changed state to UP.



Sending ID EEPROM read request.


HIT CTRL-C to abort




ID EEPROM read request successful.


Reconfiguring switches with default config ...


Chassis type: 484



    CARD_RACK_NUMBER: 0


    CARD_SLOT_NUMBER: 0


        CPU_INSTANCE: 1


  RACK_SERIAL_NUMBER: TBM13332678    


MBI Validation starts ...Our MAC address is 001e.1392.84ee


Interface link changed state to UP.


Interface link state up.



MBI validation sending request.


HIT CTRL-C to abort



MBI validation sending request.


HIT CTRL-C to abort



mbi_val_process_packet: received response.


RACK_NUM = 0, RACK_TYPE=0


Local image to boot : bootflash:disk0/hfr-os-mbi-3.8.2/mbihfr-rp.vm


boot: booting from bootflash:disk0/hfr-os-mbi-3.8.2/mbihfr-rp.vm


..


.................................................................................


#################################################

tracelogger: starting tracing in background ring mode

tracelogger running with args: -startring -F 1 -F 2

               Restricted Rights Legend


Use, duplication, or disclosure by the Government is

subject to restrictions as set forth in subparagraph

(c) of the Commercial Computer Software - Restricted

Rights clause at FAR sec. 52.227-19 and subparagraph

(c) (1) (ii) of the Rights in Technical Data and Computer

Software clause at DFARS sec. 252.227-7013.


           cisco Systems, Inc.

           170 West Tasman Drive

           San Jose, California 95134-1706




Cisco IOS XR Software for the Cisco XR HFR, Version 3.8.2

Copyright (c) 2009 by Cisco Systems, Inc.


This (D)RP Node is not ready or active for login /configuration


This (D)RP Node is not ready or active for login /configuration


RP/0/RP0/CPU0:Jan 15 09:28:36 : redfs_svr[83]: %OS-REDFS-5-INIT_FAILED : Failed to initialize no devices available: 0x13:No such device


and reboot again , I disabled WATCHDOG but nothing happen,?


this is the show platform from RP0


RP/0/RP1/CPU0:BGD-JAD-PGW1#sh plat


Wed Jan 15 12:08:50.549 Iraq

[KNode            Type            PLIM            State           Config State

-----------------------------------------------------------------------------

0/0/CPU0        MSC             Jacket Card     IOS XR RUN      PWR,NSHUT,MON

0/0/0           MSC(SPA)        10X1GE          OK              PWR,NSHUT,MON

0/0/1           MSC(SPA)        1x10GE          OK              PWR,NSHUT,MON

0/0/2           MSC(SPA)        10X1GE          OK              PWR,NSHUT,MON

0/0/4           MSC(SPA)        1x10GE          OK              PWR,NSHUT,MON

0/RP0/CPU0      RP(Standby)     N/A             MBI-BOOTING     PWR,NSHUT,MON

0/RP1/CPU0      RP(Active)      N/A             IOS XR RUN      PWR,NSHUT,MON


thanks alot

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Leo Laohoo Wed, 01/15/2014 - 12:00
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 LAN, Wireless

Rivalino Tamaela Wed, 01/15/2014 - 13:22
User Badges:
  • Cisco Employee,

From RP1 please capture:

- show context

- show reboot history location 0/rp0/cpu0


thanks,

rivalino

Actions

This Discussion

Related Content