cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
465
Views
0
Helpful
5
Replies

Cisco Access Points Rebooting

Cnote100
Level 1
Level 1

Has anyone experienced a Cisco Access Point reboot itself, on it's own?

5 Replies 5

John Blakley
VIP Alumni
VIP Alumni

Sure...which model? POE or power injector?

HTH,
John

*** Please rate all useful posts ***

HTH, John *** Please rate all useful posts ***

1250's with Power injectors

Are all of them rebooting or just one? If it's just one, I would try replacing the power injector. You can see if there's a crash log in flash. If so, you can post it here and we can tell you possibly why it rebooted.

HTH,
John

*** Please rate all useful posts ***

HTH, John *** Please rate all useful posts ***

7 out of 17 are rebooting... but it's not isolated to one IDF it's different spots within the building.i will check the log in flash.

7 out of 17 are rebooting... but it's not isolated to one IDF it's different spots within the building.i will check the log in flash.

Hmmmmm ... And if you do a "sh version" to everyone of them it comes up saying something like "by power-on"?

If this is the case, you may also want to consider the copper cables between your Injector and your AP. 

Review Cisco Networking products for a $25 gift card