×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.
Walter Dey Wed, 01/22/2014 - 03:33
User Badges:
  • Red, 2250 points or more
  • Cisco Designated VIP,

    2017 Unified Computing, Storage Networking

Although technically it will work, it is most likely not supported/tested, not even recommended

t-asteris Wed, 01/22/2014 - 06:06
User Badges:

Hi wdey,


But the hardware compatibility matrix includes a number of FC Tape libraries. So my guess is at least the devices which are included in the compatibility matrix should be able to be connected directly to the FI.


Thanks

Walter Dey Wed, 01/22/2014 - 06:22
User Badges:
  • Red, 2250 points or more
  • Cisco Designated VIP,

    2017 Unified Computing, Storage Networking

http://www.cisco.com/en/US/docs/unified_computing/ucs/interoperability/matrix/r_hcl_B_rel2.21.pdf


Enterprise Backup Interoperability Matrix

Table 8 lists the tape library models that are supported with this version of the Unified Computing System.


Note


Direct connect of tape libraries is not supported.

Actions

This Discussion