×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Pix 525 through put question

Unanswered Question
Jan 22nd, 2014
User Badges:

  Hi

We're having an issue with out Pix 525 cluster, what we're seeing is the following:

* using iternet speed tests while going through the Pix we have trouble getting past 40Mbps of our 100Mbps pipe.

* When I place the laptop outside the Pix we get 90+ Mbps. This is still going through the same internet switch and router.

* Pix CPU, Memory etc in the ADSM dashboard don't show anything that would explain this.

* switch ports that the Pix connects into seem fine, no errors.


I will be going through them again, but if they are fine I'm wondering what I can look at next. Is there a command that might show if the Pix is being taxed?


thanks

John                

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
prateeve Thu, 01/23/2014 - 10:05
User Badges:

Hi John,


Try to connect laptop directly to Pix interface and then check what exactly the speed you are getting, by that I mean just bypass the switch.


- Prateek Verma

Actions

This Discussion