01-25-2014 02:14 AM
Hello guys,
are any of you can connect via wifi to the router Cisco RV220W to 300mbps? With what configuration (auto-mode or manual)? I am unable to connect at 150 mbps sometimes but no more. thanks
Daniele
01-26-2014 12:20 PM
Have you tried using it @ 5 GHz ?
01-27-2014 03:16 AM
Hi Marc,
the wifi from my pc does not see the network at 5 GHz. Your speed wifi is 300 mbps?
01-27-2014 03:27 AM
Hi Daniele,
Im currently using a new router but I still have the RV220w and Ill try it this morning and will report back in a few hours max.
Marc
01-27-2014 03:54 AM
I get 300 Mbps with these settings (I can try later @ 2.4GHz if you want):
.
01-27-2014 04:47 AM
Thanks a lot. Can you try at 2,4 ghz with g/n ?
01-27-2014 06:31 AM
I also get 300Mbps @ 2.4GHz.
All at default settings so your "problem" is probably with your NIC, how old is it ?
Those 2 tests were made using the built-in Atheros in an HP computer and I also get excellent connection with a TPLINK/USB 2.0. I only get 150 Mbps with this one but that computer is far from the router.
Settings:
01-27-2014 06:42 AM
Thank you very much. I think the problem are my wireless hardware .
My laptop wifi connection is Atheros AR9485WB-EG and max speed is 150 mbps at 2,4 Ghz.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide