01-25-2014 02:14 AM
Hello guys,
are any of you can connect via wifi to the router Cisco RV220W to 300mbps? With what configuration (auto-mode or manual)? I am unable to connect at 150 mbps sometimes but no more. thanks
Daniele
01-26-2014 12:20 PM
Have you tried using it @ 5 GHz ?
01-27-2014 03:16 AM
Hi Marc,
the wifi from my pc does not see the network at 5 GHz. Your speed wifi is 300 mbps?
01-27-2014 03:27 AM
Hi Daniele,
Im currently using a new router but I still have the RV220w and Ill try it this morning and will report back in a few hours max.
Marc
01-27-2014 03:54 AM
I get 300 Mbps with these settings (I can try later @ 2.4GHz if you want):
.
01-27-2014 04:47 AM
Thanks a lot. Can you try at 2,4 ghz with g/n ?
01-27-2014 06:31 AM
I also get 300Mbps @ 2.4GHz.
All at default settings so your "problem" is probably with your NIC, how old is it ?
Those 2 tests were made using the built-in Atheros in an HP computer and I also get excellent connection with a TPLINK/USB 2.0. I only get 150 Mbps with this one but that computer is far from the router.
Settings:
01-27-2014 06:42 AM
Thank you very much. I think the problem are my wireless hardware .
My laptop wifi connection is Atheros AR9485WB-EG and max speed is 150 mbps at 2,4 Ghz.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: