MARS unefficient diskspace usage.

Unanswered Question
Jan 27th, 2014
User Badges:

Hey folks..

Still using standalone MARS 25 for syslog analysis and troubleshooting and it does what it should (two failover pairs of ASAs). A couple of weeks ago the appliance had been accidently droped slightly. The result = dead HDD. We replaced original 250 Gb Seagate  with 500 Gb Seagate, reimaged the appliance and it's stil working. However now we are experiencing an unefficient diskspace usage - MARS stores log data and events for about one week only ( used to be a couple of monts before). When I type diskusage I get the following output :

[pnadmin]$ diskusage

Filesystem            Size  Used Avail Use% Mounted on

/dev/hda2             857M  539M  275M  67% /

/dev/hda1             125M   16M  103M  14% /boot

/dev/sda6             9.9G  162M  9.2G   2% /log

/dev/sda5             9.9G  1.3G  8.1G  14% /opt

/dev/sda7              32G  6.4G   24G  22% /pnarchive

none                 1012M     0 1012M   0% /dev/shm

/dev/sda8             9.9G  685M  8.7G   8% /tmp

/dev/sda9             9.9G  1.9G  7.6G  20% /u01

/dev/sda11            364G   63G  283G  19% /u02

/dev/sda10            9.9G  8.1G  1.3G  87% /u03

As you can see the diskspace in heavily underused !  Is it possible somehow to configure it to use all available diskspace ?

Best Regards,


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)


This Discussion

Related Content