×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Couldn't save configuration on 3602i AP

Unanswered Question
Sandeep Choudhary Mon, 02/03/2014 - 09:20
User Badges:
  • Purple, 4500 points or more
  • Cisco Designated VIP,

    2017 Wireless

Hi ,
I think this is a CAPWAP AP , You Need WLC to use this.

If you are Facing Problem weile connecting to WLC Then paste the output:
From WLC : sh sysinfo
From. AP: sh version

Regards

Sent from Cisco Technical Support iPad App

Scott Fella Mon, 02/03/2014 - 09:53
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 Wireless

Typically that might be a hardware issue.  The write memory isn't available on lwapp or capwap, but you will get a different error:


AIR-CAP3602I-A-K9#wr mem

                   ^

% Invalid input detected at '^' marker.


If your AP is autonomous, then look at this link


https://supportforums.cisco.com/docs/DOC-3104


Thanks,

Scott

Help out other by using the rating system and marking answered questions as "Answered"

Actions

This Discussion