Solved: 3650 Version 03.03.01SE - Stack Renumbering issue

ogor · ‎02-05-2014

Hi,

I need to change the switch number of a 3650 stack but the IOS command

switch current-stack-member-number renumber new-stack-member-number

is not available and I'm with the lattest IOS XE version.

So what are my alternative to move switch 2 to switch 1 and to move switch 3 to switch 2 ?

Best regards and thanks in advance.

Olivier

SWITCH#

Cisco IOS Software, IOS-XE Software, Catalyst L3 Switch Software (CAT3K_CAA-UNIVERSALK9-M), Version 03.03.01SE RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Compiled Thu 05-Dec-13 10:15 by prod_rel_team

licensed under the GNU General Public License ("GPL") Version 2.0. The

software code licensed under GPL Version 2.0 is free software that comes

with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such

GPL code under the terms of GPL Version 2.0.

(http://www.gnu.org/licenses/gpl-2.0.html) For more details, see the

documentation or "License Notice" file accompanying the IOS-XE software,

or the applicable URL provided on the flyer accompanying the IOS-XE

software.

ROM: IOS-XE ROMMON

BOOTLDR: CAT3K_CAA Boot Loader (CAT3K_CAA-HBOOT-M) Version 1.2, RELEASE SOFTWARE (P)

SWITCH uptime is 16 hours, 40 minutes

Uptime for this control processor is 16 hours, 43 minutes

System returned to ROM by reload

System image file is "flash:packages.conf"

Last reload reason: Reload command

This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:

http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to

export@cisco.com.

License Level: Ipbase

License Type: Permanent

Next reload license Level: Ipbase

cisco WS-C3650-48PS (MIPS) processor with 4194304K bytes of physical memory.

Processor board ID FDO1745Q0EK

17 Virtual Ethernet interfaces

104 Gigabit Ethernet interfaces

2048K bytes of non-volatile configuration memory.

4194304K bytes of physical memory.

250456K bytes of Crash Files at crashinfo:.

250456K bytes of Crash Files at crashinfo-3:.

1609272K bytes of Flash at flash:.

1609272K bytes of Flash at flash-3:.

0K bytes of Dummy USB Flash at usbflash0-3:.

0K bytes of Dummy USB Flash at usbflash0:.

0K bytes of at webui:.

Base Ethernet MAC Address : 24:e9:b3:78:aa:00

Motherboard Assembly Number : 73-15131-05

Motherboard Serial Number : FDO17450KAS

Model Revision Number : A0

Motherboard Revision Number : A0

Model Number : WS-C3650-48PS

System Serial Number : FDO1745Q0EK

Switch Ports Model SW Version SW Image Mode

------ ----- ----- ---------- ---------- ----

* 2 52 WS-C3650-48PS 03.03.01SE cat3k_caa-universalk9 INSTALL

3 52 WS-C3650-48PS 03.03.01SE cat3k_caa-universalk9 INSTALL

Switch 03

---------

Switch uptime : 16 hours, 43 minutes

Base Ethernet MAC Address : 24:e9:b3:78:a8:80

Motherboard Assembly Number : 73-15131-05

Motherboard Serial Number : FDO17450KAF

Model Revision Number : A0

Motherboard Revision Number : A0

Model Number : WS-C3650-48PS

System Serial Number : FDO1745Q0DZ

Configuration register is 0x102

SWITCH#

aukhadiev · ‎02-06-2014

updated#2

There are mistakes or misprints on this document

tack Manager and High Availability Configuration Guide, Cisco IOS XE Release 3SE (Catalyst 3650 Switches):

http://www.cisco.com/en/US/docs/switches/lan/catalyst3650/software/release/3se/ha_stack_manager/configuration_guide/b_hastck_3se_3650_cg_chapter_010.html#task_1110719

Via this document the comand switch current-stack-member-number renumber new-stack-member-number is global configuration mode command...

But in practice it`s, like on 3850 platform, is EXEC commnad...

So, please someone from the vendor representatives, can you contact with documentation team and and let them know about this issue?

updated:

I'm sorry, was wrong, confused with 3850...

just looked at Stack Manager and High Availability Configuration Guide, Cisco IOS XE Release 3SE (Catalyst 3650 Switches):

http://www.cisco.com/en/US/docs/switches/lan/catalyst3650/software/release/3se/ha_stack_manager/configuration_guide/b_hastck_3se_3650_cg_chapter_010.html#task_1110719

really switch current-stack-member-number renumber new-stack-member-number is global configuration mode command...

But in 3850 it is EXEC command...

Hi,

sorry for the stupid question, are you sure that you have typed this command via EXEC mode, not via global configuration mode?

switch current-stack-member-number renumber new-stack-member-number is EXEC command...

View solution in original post

aukhadiev · ‎02-06-2014

updated#2

There are mistakes or misprints on this document

tack Manager and High Availability Configuration Guide, Cisco IOS XE Release 3SE (Catalyst 3650 Switches):

http://www.cisco.com/en/US/docs/switches/lan/catalyst3650/software/release/3se/ha_stack_manager/configuration_guide/b_hastck_3se_3650_cg_chapter_010.html#task_1110719

Via this document the comand switch current-stack-member-number renumber new-stack-member-number is global configuration mode command...

But in practice it`s, like on 3850 platform, is EXEC commnad...

So, please someone from the vendor representatives, can you contact with documentation team and and let them know about this issue?

updated:

I'm sorry, was wrong, confused with 3850...

just looked at Stack Manager and High Availability Configuration Guide, Cisco IOS XE Release 3SE (Catalyst 3650 Switches):

http://www.cisco.com/en/US/docs/switches/lan/catalyst3650/software/release/3se/ha_stack_manager/configuration_guide/b_hastck_3se_3650_cg_chapter_010.html#task_1110719

really switch current-stack-member-number renumber new-stack-member-number is global configuration mode command...

But in 3850 it is EXEC command...

Hi,

sorry for the stupid question, are you sure that you have typed this command via EXEC mode, not via global configuration mode?

switch current-stack-member-number renumber new-stack-member-number is EXEC command...

ogor · ‎02-06-2014

Hi,

It's not so stupid and looks like the 3650 are working like 3850.

With other platform like 3750, 3750-E and 3750-X the config was enterred in global config and now it must be enterred in EXEC mode.

Thanks for the feedback

3750 config guide


	Command	Purpose
Step 1	configure terminal	Enter global configuration mode.
Step 2	switch current-stack-member-number renumber new-stack-member-number	Specify the current member number and the new member number for the member. The range is 1 to 9. You can display the current member number by using the show switch user EXEC command.
Step 3	end	Return to privileged EXEC mode.
Step 4	reload slot stack-member-number	Reset the stack member.
Step 5	show switch	Verify the stack member number.
Step 6	copy running-config startup-config	Save your entries in the configuration file.

aukhadiev · ‎02-06-2014

Sorry for persistence, but you can really confirm that, in practice, this command on 3650, like 3850 platform, is EXEC command?

This is important because in document Stack Manager and High Availability Configuration Guide, Cisco IOS XE Release 3SE (Catalyst 3650 Switches):

http://www.cisco.com/en/US/docs/switches/lan/catalyst3650/software/release/3se/ha_stack_manager/configuration_guide/b_hastck_3se_3650_cg_chapter_010.html#task_1110719

this command typed as global configuration mode command... So there are mistakes or misprints on this document!

ogor · ‎02-06-2014

Hi

Yes I confirm that on the 3650 it's in EXEC mode to enter switch command renumber. So the doc is wrong.

Olivier

aukhadiev · ‎02-06-2014

Thank you, Ogor... So, please someone from the vendor representatives, can you contact with documentation team and and let them know about this issue?