×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

NX OS DHCP Question

Unanswered Question
Feb 12th, 2014
User Badges:

I am working with a Cisco Nexus 3048 using 6.0.1 NX OS, I am unable to get a DHCP Server to issue an address to a DHCP Client via a VLAN they are both part of. Setting up the DHCP access is new to me. Does anyone have the steps needed to allow DHCP on the Nexus 3048 NX OS? From everything I am reading I believe it not passing the DHCP traffic through the switch to allow the server and client to be satisfied. Anyone willing to offer any assistance would be greatly appreciated.

-Brian-

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
glen.grant Wed, 02/12/2014 - 12:33
User Badges:
  • Purple, 4500 points or more

  If they are on the same vlan then no configuration is needed other than to make sure  portfast is turned on for the client port.

Actions

This Discussion