VCS-C VCS-E demo without license

Answered Question
Feb 19th, 2014
User Badges:

Hi All UC TP Experts,


I just deployed the VCS 8.1 ova (s42700x8_1_0.ova) for the Expressway-C and Expressway-E about the demo of VPN-less Jabber. It is successful for me to configure the Expressway-C and it is fail for me to create the "traversal server" zone on the Expressway-E, but I cannot find out the "traversal server" option.


I have to insert the option key to enable the Expressway-E function, that will change the VCS role to the Expressway-E.


Note that when the VM Expressway is first installed, the banner area on the web interface will display Cisco TelePresence Video Communication Server. After the Expressway Series option key has been installed the banner area will change to show Cisco Expressway-C (or Cisco Expressway-E if the Traversal Server option key has also been installed).

Ref.: http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/expressway/install_guide/Cisco-Expressway-Virtual-Machine-Install-Guide-X8-1.pdf



I am little bit urgent to make the demo up. Any idea if I have not to order the license, then I can enable the Expresswa-E function?

Correct Answer by Patrick Sparkman about 3 years 6 months ago

Expresway demo keys are avaliable starting from X8.1.  Take a look at the following thread, last message.

https://supportforums.cisco.com/message/3742737

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.

Actions

This Discussion