cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
827
Views
0
Helpful
1
Replies

SRW248G4P Linksys switch won't boot

j.trimble
Level 1
Level 1

I  have a Linksys Cisco Small Business switch model SRW248G4P which won't boot anymore.  This is what I see with Hyperterm when I hook it up to boot it:

Image Loader 1.0.1

Loading Diagnostic Image File : SRW224G4P_SRW248G4P_boot.bix

Diagnostic 1.0.1

in

I've tried uploading the latest image file I found on Cisco web site for the switch, but it appears to be the boot file which is the problem.  It doesn't appear to try to get to the image file.

Is there a source for the latest boot image for this model switch?

1 Reply 1

Tom Watts
VIP Alumni
VIP Alumni

Hi Jason, there is not a boot release any more. It was integrated in to the firmware. This switch has been eos/eol for years and is no longer supported. The upgrade for this switch is the SF/SG 300 series.

-Tom
Please mark answered for helpful posts

-Tom Please mark answered for helpful posts http://blogs.cisco.com/smallbusiness/
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Switch products supported in this community
Cisco Business Product Family
  • CBS110
  • CBS220
  • CBS250
  • CBS350
Cisco Switching Product Family
  • 110
  • 200
  • 220
  • 250
  • 300
  • 350
  • 350X
  • 550X