turn on ssh on Cisco 827H?

Daniel Jansma · ‎02-24-2014

Hi guys,

I have a Cisco 827 and want to turn on SSH.

when i do:

conf t

show ip ssh

% Invalid input detected at '^' marker.

Then i want to create a crypto:

Crypto key generate rsa general-keys modulus 1024

% Invalid input detected at '^' marker.

Well, thats strange!

Does someone has a good tip for me?

Thanks!!!

serge123 · ‎02-24-2014

Hi Daniel,

try removing the "show" when in config mode

!

conf t

ip ssh

!

Mark Jensen · ‎02-24-2014

What IOS are you on. It may not ne a crypto IOS.

Daniel Jansma · ‎02-24-2014

Its ios 12.1

Sent from Cisco Technical Support iPhone App

Mark Jensen · ‎02-24-2014

Can you post a sh ver?

Daniel Jansma · ‎02-24-2014

Cisco Internetwork Operating System Software

IOS (tm) C820 Software (C820-OY6-M), Version 12.2(4)YA3, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)

Synched to technology version 12.2(5.4)T

Compiled Tue 03-Sep-02 12:32 by ealyon

Image text-base: 0x80013170, data-base: 0x806AA208

ROM: System Bootstrap, Version 12.2(4r)XM2, RELEASE SOFTWARE (fc1)

ROM: C820 Software (C820-OY6-M), Version 12.2(4)YA3, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)

Designshop-ADSL uptime is 17 hours, 39 minutes

System returned to ROM by reload

System image file is "flash:c820-oy6-mz.122-4.YA3.bin"

CISCO C827H (MPC855T) processor (revision 0x400) with 31744K/1024K bytes of memory.

Processor board ID AMB074000G7 (3400928317), with hardware revision 0000

CPU rev number 5

Bridging software.

1 Ethernet/IEEE 802.3 interface(s)

1 ATM network interface(s)

128K bytes of non-volatile configuration memory.

8192K bytes of processor board System flash (Read/Write)

2048K bytes of processor board Web flash (Read/Write)

Configuration register is 0x2102

johnlloyd_13 · ‎02-25-2014

hi daniel,

you'll need a K9 IOS to support SSH.

i saw c820-k9osy6-mz.123.11.YZ2.bin available for download on cisco's website.

Daniel Jansma · ‎02-25-2014

Oke cool!

Sounds good, only one problem, i don't have a support contract :-(