×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

cisco gateway telnet command help

Answered Question
Feb 24th, 2014
User Badges:

When our phone system was installed over a year ago the tech that was onsite used a command when after he would telnet into our voce gateway that would display informatin about every call that was going through the system.


For the life of me I can not recall the command that he used.


It was like a debugging tool that everytime a call was placed information about the call, source, destination, protocolots, off hook, on hook, etc...


Can anyone please help jog my brain into remembering this cisco gateway command?


thanks in advance

Correct Answer by yahsiel2004 about 3 years 5 months ago

show voice call status


debug isdn q931 ----->(Don't forget to turn on "term mon")


HTH

Regards,

Yosh

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
yahsiel2004 Mon, 02/24/2014 - 11:58
User Badges:
  • Gold, 750 points or more

show voice call status


debug isdn q931 ----->(Don't forget to turn on "term mon")


HTH

Regards,

Yosh

yahsiel2004 Mon, 02/24/2014 - 12:12
User Badges:
  • Gold, 750 points or more

You're welcome.


Regards,

Yosh

Actions

This Discussion

Related Content