inter-vlan communication by core switch

fb_webuser · ‎02-25-2014

how to inter-vlan communication by core switch and ip address assigned by windows server 2008 r2 with dhcp server

---

Furose M · ‎03-09-2014

say the VLANs are vlan 10 and 20.

on the core switch --> assign IP address to VLAN 10 and VLAN 20.

enable "IP forwarding" in the switch.

on the DHCP server, define scope for VLAN 10 and 20 and set the "default router" to the IP address you configured on the core switch.

configure "ip helper address" in the switch's VLAN interface, if the DHCP server is residing in a differnet VLAN.

you are done.