×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Speed Dials Labels different from CUCM config

Unanswered Question
Feb 27th, 2014
User Badges:

Hi,


I have got the following versions:


CUCM 9.1.2.10000-28

8961 IP Phone Firmware sip8961.9-3-4-24


Some user have the problem that in the CUCM Device Profile "Busy Lamp Field Speed Dial Configuration" the label entry is diefferent to the label shown on the phone.


For example: In CUCM: "Henry Test" ind the Phone: "Henry"


It seems like that there is no connection between the CUCM and the phone for speed dials.


Reboot or Relogin doens not help.


Thank your help


Frank

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Gordon Ross Fri, 02/28/2014 - 10:39
User Badges:
  • Blue, 1500 points or more

Try making a trivial change in CUCM. This should force CUCM to re-generate the config for the phone.


GTG


Please rate all helpful posts.

Frank Janka Mon, 03/03/2014 - 04:25
User Badges:

I finally worked it out: The port of the Phone was configed like a video port. The user used this port for over 10 month with no problems. I changed the config of the port and now it works fine.

Actions

This Discussion