I need some help with the option "load server" in the configuration page of a device.
I need a TFTP server on a remote site because the bandwith is low.
I put this option in my device page (7942 and 7962 phone), but the phone continues to download his firmware to the callmanager.
My TFTP server is fully functionnal, to test, I configured my DHCP server with the option 150 with, in first position my remote TFTP server, then my CallManager. (option 150 ip IP_TFTP_SERVER IP_CUCM)
My phones are able to download their firmware but they can't register to the callManager. So I think the phone see the first TFTP server then he doesn't try to reach the second (callmanager).
Can someone help me. I didn't have any ideas yet.