×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

UC520 SIP Incoming OK Outgoing Fail

Unanswered Question
Mar 4th, 2014
User Badges:

Hi I've a UC520 and im tring to connect to a Voip Supplier "Engin"


it is regestering

and i can recieve calls but i cannot make any calls


the debug logs shows disconnect (47) "No Resouces"


i'm complealy stumped


i've attached a copy of the incoming and outgoing log and a show tech



Thanks

Leslie

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Alexander Maroukian Thu, 03/06/2014 - 04:52
User Badges:
  • Cisco Employee,

Hello Leslie,


I would try to remove the keepalive target and the keepalive time and re register with the SIP provider.

under sip-ua:

no keepalive taget

no timers keepalive


HTH,

Alex


*Please rate helpful posts

lritchie1979 Mon, 03/10/2014 - 22:57
User Badges:

Found the outgoing SIP calls where not being resolved though DNS properly

it looks like it has resolved correctly in the log 

003450: Mar  5 06:02:59.103: //-1/xxxxxxxxxxxx/SIP/Info/sip_dns_type_srv_query: IP Address of vic-vsbc.byo.engin.com.au is:

003451: Mar  5 06:02:59.103: //-1/xxxxxxxxxxxx/SIP/Info/sip_dns_type_srv_query: 203.161.164.69

but we had to change 

outbound-proxy dns:byo.engin.com.au

 

to

outbound-proxy ipv4:203.161.164.69:5060

Actions

This Discussion

Related Content