03-05-2014 01:34 PM - edited 07-05-2021 12:20 AM
HI
We have bought an air-ap1141n-e to change another cisco AP.
I really dont know how to start configuration, I just need the AP to be connected to my network
switch so the people in the office have wireless as we have before the otrh AP crashes,
Thanks
03-05-2014 01:53 PM
Hi Mikel,
As i see from the AP name it appears to be an autonomous AP.
Check this link on how to configure the same.
https://supportforums.cisco.com/docs/DOC-16087
Thanks
Ashish.
03-05-2014 02:37 PM
You can find other guides that can help you here:
Thanks,
Scott
*****Help out other by using the rating system and marking answered questions as "Answered"*****
03-05-2014 05:50 PM
Hi Mlkel,
You want to use this AP as standalone ar as LWAP.
Do we have WLCs as well.
* If we have WLCs as well then this AP needs to be converted to LWAP as this is a Standalone AP. (Please share the show version from the AP console so that we can confirm if this AP has Standalone or LWAP image)
* If we do not have WLCs then we would have to configure this AP as a Standalone AP.
So our first step would be to know the configuration requirement-- would it be a LWAP or Standalone AP then only we can make further action plan.
Thanks and regards,
Manas Pratap Singh.
06-15-2015 03:24 AM
Hi
Im just taking this problem again to try and solve it. I have my cisco AP withouth using for a year because of the difficulties to configure it, it is just for experts.
Well I really dont know if its on LWAP or standalone mode.
I have try to connect to it by console mode but do not have any answer.
What i need is to configure it on DHCP mode to get the IP address from my DHCP server and give wifi signal to my office, thats all what I need.
I can give remote access to my notebook so you can give me some advices on how to start configuration.
Thanks
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: