cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2296
Views
0
Helpful
3
Replies

Static RP Configuration PIM vs Candidate RP election

Rajesh cisco
Level 1
Level 1

Hi Team,

i have static RP for a group range (225.0.0.0 to 255.0.0.0) and i have configured dynamic RP (bootstrap mechanism) for the same group range.

which one will be elected as RP-SET.

please share your views.

thanks a lot in advance.

regards,

Rajesh kumar V

1 Accepted Solution

Accepted Solutions

Rajesh

Static RP can co-exist with dynamic RP mechanisms (ie: Auto-RP). Dynamically learned RP takes precedence over manually configured RPs. If a router receives Auto-RP information for a multicast group that has manually configured RP information, then the Auto-RP information will be used.

http://www.cisco.com/c/en/us/products/collateral/ios-nx-os-software/ip-multicast/whitepaper_c11-508498.html

Jon

View solution in original post

3 Replies 3

Rajesh cisco
Level 1
Level 1

Any suggestion very much appreciated.

Rajesh

Static RP can co-exist with dynamic RP mechanisms (ie: Auto-RP). Dynamically learned RP takes precedence over manually configured RPs. If a router receives Auto-RP information for a multicast group that has manually configured RP information, then the Auto-RP information will be used.

http://www.cisco.com/c/en/us/products/collateral/ios-nx-os-software/ip-multicast/whitepaper_c11-508498.html

Jon

thanks  jon. now i got clarified. thanks agian.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: