03-06-2014 10:47 AM - edited 03-07-2019 06:34 PM
Hi
One question about FCoE Configuration
Is better to permit the Native VLAN (FIP VLAN) in the allowed trunk vlans or just left it in the native vlan configuration
Here the two choices showing my doubt
VLAN 1197
name FIP_VLAN
!
VLAN 1198
name FCOE_VLAN
fcoe vsan XX
01)
interface EthernetX/X
switchport
switchport mode trunk
switchport trunk native vlan 1197
switchport trunk allowed vlan 1197,1198
spanning-tree port type edge trunk
or
02)
interface EthernetX/X
switchport
switchport mode trunk
switchport trunk native vlan 1197
switchport trunk allowed vlan 1198
spanning-tree port type edge trunk
Solved! Go to Solution.
03-06-2014 04:40 PM
Hi,
Usually when you add it to the trunk as native, you don't to add again. So, option-2
HTH
03-06-2014 04:40 PM
Hi,
Usually when you add it to the trunk as native, you don't to add again. So, option-2
HTH
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: