×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Respond to SNMP queries while getting the BGP Full View

Unanswered Question
Mar 13th, 2014
User Badges:

Hi.

Our monitoring software draws SNMP graphs from the Cisco 7609 router each minute.

When the router gets the BGP Full View from our upstream provider it stops responding to SNMP queries (2-3 minutes downtime)

I tried the command:
snmp-server priority high

but it doesn't help.

Is there a way to solve our issue ?

#show mod
Mod Ports Card Type                              Model              Serial No.
--- ----- -------------------------------------- ------------------ -----------
  1   24  CEF720 24 port 1000mb SFP              WS-X6724-SFP       
  5    2  Supervisor Engine 720 (Cold)           WS-SUP720-3BXL     
  6    2  Supervisor Engine 720 (Active)         WS-SUP720-BASE     
  7    4  CEF720 4 port 10-Gigabit Ethernet      WS-X6704-10GE      

 

Thank you.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
AFROJ AHMAD Thu, 03/13/2014 - 17:24
User Badges:
  • Cisco Employee,

Hi,

 

Try to Increase and SNMP TIMEOUT and  SNMP RETRY in your tool for this device and check the issue.

 

Thanks-

Afroz

***Ratings Encourages Contributors ***

Actions

This Discussion