Port-Based Authentication on 877

Unanswered Question
Mar 13th, 2014
User Badges:

Hi 

I have applied following commands to enable Port-Based Authentication but when I run command sh mac address-table it shows static mac on this port   (  xx    0000.xxxx.xxxx    STATIC      Gi1/0/3) .  

 

authentication control-direction in

authentication event fail retry 1 action authorize vlan xx

authentication event no-response action authorize vlan xx

authentication host-mode multi-domain

authentication order dot1x mab

authentication port-control auto

authentication violation protect

mab

dot1x pae authenticator

dot1x timeout quiet-period 10

dot1x timeout tx-period 10

dot1x timeout supp-timeout 10

 

As I remove command authentication port-control auto then sh mac address-table  command shows me DYNAMIC MAC.

 

Anyone can please let explain me why it is happing 

 

Regards,

 

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion