×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Error update images for Wireless Controller WLC 2500

Answered Question
Mar 17th, 2014
User Badges:

I have problem When I want to update images for Wireless Controller WLC 2500,
I choose number 6 when Boot Loader Menu shown.

For your attenttion, thankyou.

 

============================================================
 Boot Loader Menu
============================================================

 1. Run primary image (Image not found) - Active
 2. Run backup image (Image not found)
 3. Change active boot image
 4. Clear configuration
 5. Format FLASH Drive
 6. Manually update images

------------------------------------------------------------
Enter selection: 6
Launching...
Launching images...
init started: BusyBox v1.6.0 (2009-02-03 04:56:32 EST) multi-call binary
Mount failed for selinuxfs on /selinux:  No such file or directory
starting pid 655, tty '': '/etc/init.d/rcS'
Use DHCP for ip configuration (Y/n)? n
Enter switch IP address: 192.168.1.12
Enter switch netmask: 255.255.255.0
Enter switch gateway: 192.168.1.10
Enter TFTP server IP address: 192.168.1.10

You have entered:
     IP Address     : 192.168.1.12
     Netmask        : 255.255.255.0
     Gateway        : 192.168.1.10
     Server Ip Addr : 192.168.1.10

Is this correct(y/N)? y

!!! WARNING updating using .aes or unapproved files will disable this unit !!!

Do you want to update RTOS (y/N)? y

Do you want to update Primary Or Secondary Image (P/s)? P

Enter filename for RTOS update: AIR-CT2500-K9-1-8-0-0-FUS

Correct Answer by Leo Laohoo about 3 years 5 months ago

but from where I can download the RTOS image?

Cisco TAC can publish the RTOS image. 

should I use RMA service for sofware fail? 

This is normal.  You can RMA the unit.

 

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Leo Laohoo Tue, 03/18/2014 - 00:59
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 LAN, Wireless

Enter filename for RTOS update: AIR-CT2500-K9-1-8-0-0-FUS

That is not a valid RTOS image. 

 

You have two choices:  Contact TAC and ask for an RTOS image or you get your appliance RMA-ed.

Dani Simanjuntak Tue, 03/18/2014 - 01:13
User Badges:

thankyou for your answer, but from where I can download the RTOS image?

should I use RMA service for sofware fail? I think this not serius problem.

Correct Answer
Leo Laohoo Tue, 03/18/2014 - 01:24
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 LAN, Wireless

but from where I can download the RTOS image?

Cisco TAC can publish the RTOS image. 

should I use RMA service for sofware fail? 

This is normal.  You can RMA the unit.

 

Actions

This Discussion