Cisco 1532E Mesh APs

Unanswered Question
Mar 18th, 2014
User Badges:

Does anyone know if the dual-band can be configured once the 1532E is in autonomous mode ?

To use the AIR-ANT2547V-N antenna. I need to configure dual-band for the anntennas.

I only found this page:

http://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/7-6/b...

 

and it gives only the controller commands to use when the AP has capwap software installed.

this is the capwap command: 

(Cisco Controller) >config ap antenna-band-mode <single|dual> <ap_name>
 
they don´t mention autonomous....

 

The reason why am wondering is to do site surveys without "draging" the controlller with the survey kit and use the AP as autonomous.

 

 

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
kristjan.edvardsson Tue, 03/18/2014 - 18:38
User Badges:

I found it!

global config mode:

dot11 ant-band-mode dual

 

that saved my controller-less survey day! :)

Actions

This Discussion