cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
256
Views
0
Helpful
1
Replies

Called party transformation pattern WITH SIP TRUNK

Hi

 

My question pointed to the below discussion

https://supportforums.cisco.com/discussion/11708211/called-party-transformation-pattern

It was play great with CUCM--h323 VG---PRI but not now with CUCM--SIP VG--SIP TRUNK with ISP

Could you pls share your thoughts?

 

with this scenarion CUCM--h323 VG--- PRI i was done the below

CUCM Config

 

Route Pattern: 9.00!

- Called Party Transform: Predot

 

Route List: YourRouteList

- Called Party Transform: Predot / Prefix 91018

 

 

H323 GW Config

 

Keep the dialpeer as is and add the following:

voice service voip

no supplementary-service h225-notify cid-update

!

 

 

Now with this scenarion??

CUCM--SIP VG--SIP TRUNK with ISP

Please rate all useful posts Regards Chrysostomos ""The Most Successful People Are Those Who Are Good At Plan B""
1 Reply 1

George Thomas
Level 10
Level 10

chrysostomos1980

Its pretty much the same, if you cant get this to work do as Bill mentioned in the other post, use translation profiles on the dial-peer level to prefix the digits.

HTH.

Please rate useful posts.