I've two asa 5520's to setup site to site vpn. I want to test first before deployment to the remote site. After running the s2s wizard, I have no VPN connection. The settings are identical, apart from the peer outside addresses. I am using port 0/0 on both, connected by patch cable. I can ping the outside addresses from either device, 192.168.1.1/30 and .2/30. I cant see any vpn led on the front on the device, and no ipcec tunnels seem to come up in the monitoring section. Not having done this before, any help on how to test this would be greatly recieved.