03-20-2014 03:33 PM - edited 07-05-2021 12:29 AM
A partner for cisco tells me that you can have two types of authentication methods on a single Wifi AP.
Is there any truth to this? And if so how is this achieved?
For Example, I would need domain users to authenticate to a radius server for access to the wifi, but i also need a BYOD network, and a open wifi network for customers, and a special network for confidential stuff that i can't mention in this forum.
My thought is that i need at least 4 access points to achieve this.
Solved! Go to Solution.
03-21-2014 08:00 AM
Hi Check these link:
http://www.cisco.com/c/en/us/support/docs/security/secure-access-control-server-windows/43486-acs-peap.html
https://supportforums.cisco.com/document/74751/dynamic-vlan-assignment-autonomous-ap-using-acs-5
http://www.cisco.com/c/en/us/support/docs/wireless/aironet-1100-series/44844-leapserver.html
Regards
Dont forget to rate helpful posts
03-21-2014 08:00 AM
Hi Check these link:
http://www.cisco.com/c/en/us/support/docs/security/secure-access-control-server-windows/43486-acs-peap.html
https://supportforums.cisco.com/document/74751/dynamic-vlan-assignment-autonomous-ap-using-acs-5
http://www.cisco.com/c/en/us/support/docs/wireless/aironet-1100-series/44844-leapserver.html
Regards
Dont forget to rate helpful posts
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide